FreeType-2.2.1 API Reference

TrueType Tables

Synopsis

TT_HeaderFT_Sfnt_Tag
TT_HoriHeaderFT_Get_Sfnt_Table
TT_VertHeaderFT_Load_Sfnt_Table
TT_OS2FT_Sfnt_Table_Info
TT_PostscriptFT_Get_CMap_Language_ID
TT_PCLTFT_PARAM_TAG_UNPATENTED_HINTING
TT_MaxProfile


This section contains the definition of TrueType-specific tables as well as some routines used to access and process them.


TT_Header


  typedef struct  TT_Header_
  {
    FT_Fixed   Table_Version;
    FT_Fixed   Font_Revision;

    FT_Long    CheckSum_Adjust;
    FT_Long    Magic_Number;

    FT_UShort  Flags;
    FT_UShort  Units_Per_EM;

    FT_Long    Created [2];
    FT_Long    Modified[2];

    FT_Short   xMin;
    FT_Short   yMin;
    FT_Short   xMax;
    FT_Short   yMax;

    FT_UShort  Mac_Style;
    FT_UShort  Lowest_Rec_PPEM;

    FT_Short   Font_Direction;
    FT_Short   Index_To_Loc_Format;
    FT_Short   Glyph_Data_Format;

  } TT_Header;


A structure used to model a TrueType font header table. All fields follow the TrueType specification.



[Index] [TOC]

TT_HoriHeader


  typedef struct  TT_HoriHeader_
  {
    FT_Fixed   Version;
    FT_Short   Ascender;
    FT_Short   Descender;
    FT_Short   Line_Gap;

    FT_UShort  advance_Width_Max;      /* advance width maximum */

    FT_Short   min_Left_Side_Bearing;  /* minimum left-sb       */
    FT_Short   min_Right_Side_Bearing; /* minimum right-sb      */
    FT_Short   xMax_Extent;            /* xmax extents          */
    FT_Short   caret_Slope_Rise;
    FT_Short   caret_Slope_Run;
    FT_Short   caret_Offset;

    FT_Short   Reserved[4];

    FT_Short   metric_Data_Format;
    FT_UShort  number_Of_HMetrics;

    /* The following fields are not defined by the TrueType specification */
    /* but they are used to connect the metrics header to the relevant    */
    /* `HMTX' table.                                                      */

    void*      long_metrics;
    void*      short_metrics;

  } TT_HoriHeader;


A structure used to model a TrueType horizontal header, the ‘hhea’ table, as well as the corresponding horizontal metrics table, i.e., the ‘hmtx’ table.


fields
Version

The table version.

Ascender

The font's ascender, i.e., the distance from the baseline to the top-most of all glyph points found in the font.

This value is invalid in many fonts, as it is usually set by the font designer, and often reflects only a portion of the glyphs found in the font (maybe ASCII).

You should use the ‘sTypoAscender’ field of the OS/2 table instead if you want the correct one.

Descender

The font's descender, i.e., the distance from the baseline to the bottom-most of all glyph points found in the font. It is negative.

This value is invalid in many fonts, as it is usually set by the font designer, and often reflects only a portion of the glyphs found in the font (maybe ASCII).

You should use the ‘sTypoDescender’ field of the OS/2 table instead if you want the correct one.

Line_Gap

The font's line gap, i.e., the distance to add to the ascender and descender to get the BTB, i.e., the baseline-to-baseline distance for the font.

advance_Width_Max

This field is the maximum of all advance widths found in the font. It can be used to compute the maximum width of an arbitrary string of text.

min_Left_Side_Bearing

The minimum left side bearing of all glyphs within the font.

min_Right_Side_Bearing

The minimum right side bearing of all glyphs within the font.

xMax_Extent

The maximum horizontal extent (i.e., the ‘width’ of a glyph's bounding box) for all glyphs in the font.

caret_Slope_Rise

The rise coefficient of the cursor's slope of the cursor (slope=rise/run).

caret_Slope_Run

The run coefficient of the cursor's slope.

Reserved

10 reserved bytes.

metric_Data_Format

Always 0.

number_Of_HMetrics

Number of HMetrics entries in the ‘hmtx’ table -- this value can be smaller than the total number of glyphs in the font.

long_metrics

A pointer into the ‘hmtx’ table.

short_metrics

A pointer into the ‘hmtx’ table.

note

IMPORTANT: The TT_HoriHeader and TT_VertHeader structures should be identical except for the names of their fields which are different.

This ensures that a single function in the ‘ttload’ module is able to read both the horizontal and vertical headers.


[Index] [TOC]

TT_VertHeader


  typedef struct  TT_VertHeader_
  {
    FT_Fixed   Version;
    FT_Short   Ascender;
    FT_Short   Descender;
    FT_Short   Line_Gap;

    FT_UShort  advance_Height_Max;      /* advance height maximum */

    FT_Short   min_Top_Side_Bearing;    /* minimum left-sb or top-sb       */
    FT_Short   min_Bottom_Side_Bearing; /* minimum right-sb or bottom-sb   */
    FT_Short   yMax_Extent;             /* xmax or ymax extents            */
    FT_Short   caret_Slope_Rise;
    FT_Short   caret_Slope_Run;
    FT_Short   caret_Offset;

    FT_Short   Reserved[4];

    FT_Short   metric_Data_Format;
    FT_UShort  number_Of_VMetrics;

    /* The following fields are not defined by the TrueType specification */
    /* but they're used to connect the metrics header to the relevant     */
    /* `HMTX' or `VMTX' table.                                            */

    void*      long_metrics;
    void*      short_metrics;

  } TT_VertHeader;


A structure used to model a TrueType vertical header, the ‘vhea’ table, as well as the corresponding vertical metrics table, i.e., the ‘vmtx’ table.


fields
Version

The table version.

Ascender

The font's ascender, i.e., the distance from the baseline to the top-most of all glyph points found in the font.

This value is invalid in many fonts, as it is usually set by the font designer, and often reflects only a portion of the glyphs found in the font (maybe ASCII).

You should use the ‘sTypoAscender’ field of the OS/2 table instead if you want the correct one.

Descender

The font's descender, i.e., the distance from the baseline to the bottom-most of all glyph points found in the font. It is negative.

This value is invalid in many fonts, as it is usually set by the font designer, and often reflects only a portion of the glyphs found in the font (maybe ASCII).

You should use the ‘sTypoDescender’ field of the OS/2 table instead if you want the correct one.

Line_Gap

The font's line gap, i.e., the distance to add to the ascender and descender to get the BTB, i.e., the baseline-to-baseline distance for the font.

advance_Height_Max

This field is the maximum of all advance heights found in the font. It can be used to compute the maximum height of an arbitrary string of text.

min_Top_Side_Bearing

The minimum top side bearing of all glyphs within the font.

min_Bottom_Side_Bearing

The minimum bottom side bearing of all glyphs within the font.

yMax_Extent

The maximum vertical extent (i.e., the ‘height’ of a glyph's bounding box) for all glyphs in the font.

caret_Slope_Rise

The rise coefficient of the cursor's slope of the cursor (slope=rise/run).

caret_Slope_Run

The run coefficient of the cursor's slope.

caret_Offset

The cursor's offset for slanted fonts. This value is ‘reserved’ in vmtx version 1.0.

Reserved

8 reserved bytes.

metric_Data_Format

Always 0.

number_Of_HMetrics

Number of VMetrics entries in the ‘vmtx’ table -- this value can be smaller than the total number of glyphs in the font.

long_metrics

A pointer into the ‘vmtx’ table.

short_metrics

A pointer into the ‘vmtx’ table.

note

IMPORTANT: The TT_HoriHeader and TT_VertHeader structures should be identical except for the names of their fields which are different.

This ensures that a single function in the ‘ttload’ module is able to read both the horizontal and vertical headers.


[Index] [TOC]

TT_OS2


  typedef struct  TT_OS2_
  {
    FT_UShort  version;                /* 0x0001 - more or 0xFFFF */
    FT_Short   xAvgCharWidth;
    FT_UShort  usWeightClass;
    FT_UShort  usWidthClass;
    FT_Short   fsType;
    FT_Short   ySubscriptXSize;
    FT_Short   ySubscriptYSize;
    FT_Short   ySubscriptXOffset;
    FT_Short   ySubscriptYOffset;
    FT_Short   ySuperscriptXSize;
    FT_Short   ySuperscriptYSize;
    FT_Short   ySuperscriptXOffset;
    FT_Short   ySuperscriptYOffset;
    FT_Short   yStrikeoutSize;
    FT_Short   yStrikeoutPosition;
    FT_Short   sFamilyClass;

    FT_Byte    panose[10];

    FT_ULong   ulUnicodeRange1;        /* Bits 0-31   */
    FT_ULong   ulUnicodeRange2;        /* Bits 32-63  */
    FT_ULong   ulUnicodeRange3;        /* Bits 64-95  */
    FT_ULong   ulUnicodeRange4;        /* Bits 96-127 */

    FT_Char    achVendID[4];

    FT_UShort  fsSelection;
    FT_UShort  usFirstCharIndex;
    FT_UShort  usLastCharIndex;
    FT_Short   sTypoAscender;
    FT_Short   sTypoDescender;
    FT_Short   sTypoLineGap;
    FT_UShort  usWinAscent;
    FT_UShort  usWinDescent;

    /* only version 1 tables: */

    FT_ULong   ulCodePageRange1;       /* Bits 0-31   */
    FT_ULong   ulCodePageRange2;       /* Bits 32-63  */

    /* only version 2 tables: */

    FT_Short   sxHeight;
    FT_Short   sCapHeight;
    FT_UShort  usDefaultChar;
    FT_UShort  usBreakChar;
    FT_UShort  usMaxContext;

  } TT_OS2;


A structure used to model a TrueType OS/2 table. This is the long table version. All fields comply to the TrueType specification.

Note that we now support old Mac fonts which do not include an OS/2 table. In this case, the ‘version’ field is always set to 0xFFFF.



[Index] [TOC]

TT_Postscript


  typedef struct  TT_Postscript_
  {
    FT_Fixed  FormatType;
    FT_Fixed  italicAngle;
    FT_Short  underlinePosition;
    FT_Short  underlineThickness;
    FT_ULong  isFixedPitch;
    FT_ULong  minMemType42;
    FT_ULong  maxMemType42;
    FT_ULong  minMemType1;
    FT_ULong  maxMemType1;

    /* Glyph names follow in the file, but we don't   */
    /* load them by default.  See the ttpost.c file.  */

  } TT_Postscript;


A structure used to model a TrueType Postscript table. All fields comply to the TrueType specification. This structure does not reference the Postscript glyph names, which can be nevertheless accessed with the ‘ttpost’ module.



[Index] [TOC]

TT_PCLT


  typedef struct  TT_PCLT_
  {
    FT_Fixed   Version;
    FT_ULong   FontNumber;
    FT_UShort  Pitch;
    FT_UShort  xHeight;
    FT_UShort  Style;
    FT_UShort  TypeFamily;
    FT_UShort  CapHeight;
    FT_UShort  SymbolSet;
    FT_Char    TypeFace[16];
    FT_Char    CharacterComplement[8];
    FT_Char    FileName[6];
    FT_Char    StrokeWeight;
    FT_Char    WidthType;
    FT_Byte    SerifStyle;
    FT_Byte    Reserved;

  } TT_PCLT;


A structure used to model a TrueType PCLT table. All fields comply to the TrueType specification.



[Index] [TOC]

TT_MaxProfile


  typedef struct  TT_MaxProfile_
  {
    FT_Fixed   version;
    FT_UShort  numGlyphs;
    FT_UShort  maxPoints;
    FT_UShort  maxContours;
    FT_UShort  maxCompositePoints;
    FT_UShort  maxCompositeContours;
    FT_UShort  maxZones;
    FT_UShort  maxTwilightPoints;
    FT_UShort  maxStorage;
    FT_UShort  maxFunctionDefs;
    FT_UShort  maxInstructionDefs;
    FT_UShort  maxStackElements;
    FT_UShort  maxSizeOfInstructions;
    FT_UShort  maxComponentElements;
    FT_UShort  maxComponentDepth;

  } TT_MaxProfile;


The maximum profile is a table containing many max values which can be used to pre-allocate arrays. This ensures that no memory allocation occurs during a glyph load.


fields
version

The version number.

numGlyphs

The number of glyphs in this TrueType font.

maxPoints

The maximum number of points in a non-composite TrueType glyph. See also the structure element ‘maxCompositePoints’.

maxContours

The maximum number of contours in a non-composite TrueType glyph. See also the structure element ‘maxCompositeContours’.

maxCompositePoints

The maximum number of points in a composite TrueType glyph. See also the structure element ‘maxPoints’.

maxCompositeContours

The maximum number of contours in a composite TrueType glyph. See also the structure element ‘maxContours’.

maxZones

The maximum number of zones used for glyph hinting.

maxTwilightPoints

The maximum number of points in the twilight zone used for glyph hinting.

maxStorage

The maximum number of elements in the storage area used for glyph hinting.

maxFunctionDefs

The maximum number of function definitions in the TrueType bytecode for this font.

maxInstructionDefs

The maximum number of instruction definitions in the TrueType bytecode for this font.

maxStackElements

The maximum number of stack elements used during bytecode interpretation.

maxSizeOfInstructions

The maximum number of TrueType opcodes used for glyph hinting.

maxComponentElements

The maximum number of simple (i.e., non- composite) glyphs in a composite glyph.

maxComponentDepth

The maximum nesting depth of composite glyphs.

note

This structure is only used during font loading.


[Index] [TOC]

FT_Sfnt_Tag


  typedef enum
  {
    ft_sfnt_head = 0,
    ft_sfnt_maxp = 1,
    ft_sfnt_os2  = 2,
    ft_sfnt_hhea = 3,
    ft_sfnt_vhea = 4,
    ft_sfnt_post = 5,
    ft_sfnt_pclt = 6,

    sfnt_max   /* internal end mark */

  } FT_Sfnt_Tag;


An enumeration used to specify the index of an SFNT table. Used in the FT_Get_Sfnt_Table API function.



[Index] [TOC]

FT_Get_Sfnt_Table


  FT_EXPORT( void* )
  FT_Get_Sfnt_Table( FT_Face      face,
                     FT_Sfnt_Tag  tag );


Returns a pointer to a given SFNT table within a face.


input
face

A handle to the source.

tag

The index of the SFNT table.

return

A type-less pointer to the table. This will be 0 in case of error, or if the corresponding table was not found OR loaded from the file.

note

The table is owned by the face object and disappears with it.

This function is only useful to access SFNT tables that are loaded by the sfnt, truetype, and opentype drivers. See FT_Sfnt_Tag for a list.


[Index] [TOC]

FT_Load_Sfnt_Table


  FT_EXPORT( FT_Error )
  FT_Load_Sfnt_Table( FT_Face    face,
                      FT_ULong   tag,
                      FT_Long    offset,
                      FT_Byte*   buffer,
                      FT_ULong*  length );


Loads any font table into client memory.


input
face

A handle to the source face.

tag

The four-byte tag of the table to load. Use the value 0 if you want to access the whole font file. Otherwise, you can use one of the definitions found in the FT_TRUETYPE_TAGS_H file, or forge a new one with FT_MAKE_TAG.

offset

The starting offset in the table (or file if tag == 0).

output
buffer

The target buffer address. The client must ensure that the memory array is big enough to hold the data.

inout
length

If the ‘length’ parameter is NULL, then try to load the whole table. Return an error code if it fails.

Else, if ‘*length’ is 0, exit immediately while returning the table's (or file) full size in it.

Else the number of bytes to read from the table or file, from the starting offset.

return

FreeType error code. 0 means success.

note

If you need to determine the table's length you should first call this function with ‘*length’ set to 0, as in the following example:

  FT_ULong  length = 0;


  error = FT_Load_Sfnt_Table( face, tag, 0, NULL, &length );
  if ( error ) { ... table does not exist ... }

  buffer = malloc( length );
  if ( buffer == NULL ) { ... not enough memory ... }

  error = FT_Load_Sfnt_Table( face, tag, 0, buffer, &length );
  if ( error ) { ... could not load table ... }

[Index] [TOC]

FT_Sfnt_Table_Info


  FT_EXPORT( FT_Error )
  FT_Sfnt_Table_Info( FT_Face    face,
                      FT_UInt    table_index,
                      FT_ULong  *tag,
                      FT_ULong  *length );


Returns information on an SFNT table.


input
face

A handle to the source face.

table_index

The index of an SFNT table. The function returns FT_Err_Table_Missing for an invalid value.

output
tag

The name tag of the SFNT table.

length

The length of the SFNT table.

return

FreeType error code. 0 means success.

note

SFNT tables with length zero are treated as missing by Windows.


[Index] [TOC]

FT_Get_CMap_Language_ID


  FT_EXPORT( FT_ULong )
  FT_Get_CMap_Language_ID( FT_CharMap  charmap );


Return TrueType/sfnt specific cmap language ID. Definitions of language ID values are in ‘freetype/ttnameid.h’.


input
charmap

The target charmap.

return

The language ID of ‘charmap’. If ‘charmap’ doesn't belong to a TrueType/sfnt face, just return 0 as the default value.


[Index] [TOC]

FT_PARAM_TAG_UNPATENTED_HINTING


#define FT_PARAM_TAG_UNPATENTED_HINTING  FT_MAKE_TAG( 'u', 'n', 'p', 'a' )


A constant used as the tag of an FT_Parameter structure to indicate that unpatented methods only should be used by the TrueType bytecode interpreter for a typeface opened by FT_Open_Face.



[Index] [TOC]